It may have various things stored in the fault code and the "trims" memories that prevent it adjusting properly to the higher octane fuel Nick. It also clears faults logged in the memories of the ABS and EAT (V6 models) ECUs - i'm 99% certain it resets any fault codes in MEMS as well but i'd have to check to be 100% certain. I know certainly on the 2.7 it will and as Dean has a 2.7..................zcar wrote:So I'm guessing it wont adjust as quick if Fuse S isn't pulled then Dave?
L reg 827 Sterling
- scoobyh123
- Rover Guru
- Posts: 12156
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: L reg 827 Sterling
-
- Rover Guru
- Posts: 1287
- Joined: Sun Jun 09, 2013 11:19 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: L reg 827 Sterling
Do you think it might help with the Emissons at MOT time then Dave....
1993 Rover 827 SLI Fastback Mk2
1999 Rover 825 Sterling Saloon Mk2 (HGF)
------------------
Previously
1996 Rover 825 Sterling Coupe Mk2
1993 Rover 827 Sterling Saloon Mk2
1990 Rover 827 Sterling Saloon Mk1
1972 Rover P6 2000TC
1999 Rover 825 Sterling Saloon Mk2 (HGF)
------------------
Previously
1996 Rover 825 Sterling Coupe Mk2
1993 Rover 827 Sterling Saloon Mk2
1990 Rover 827 Sterling Saloon Mk1
1972 Rover P6 2000TC
- zcar
- Rover Guru
- Posts: 696
- Joined: Sat Aug 30, 2008 1:42 pm
- Location: Was Up North, now Daan Sarf in Dorset [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: L reg 827 Sterling
It didnt with mine. I pulled S about 2 weeks before my MoT and it was the worst emissions ive seen. It took 2 attmepts to get it through. Now granted its a different machine down here and Im 300 miles south, but for the last 20 years of MoTing these at the same garge up north Ive always had really good results.
Just pulled it anyways t reset for this Shell V Max stuff its using.
Just pulled it anyways t reset for this Shell V Max stuff its using.
- scoobyh123
- Rover Guru
- Posts: 12156
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: L reg 827 Sterling
deano wrote:Do you think it might help with the Emissons at MOT time then Dave....
It could do Dean but only if you give it a few weeks to retune itself before the MoT as Nick points out, he pulled fuse S about 2 weeks before and it took a bit longer until it had sorted itself out. That said the MEMS system (i assume it was on your 820 Nick?) takes longer than the Honda PGM-Fi system fitted to the 2.7 so that may be why.
- zcar
- Rover Guru
- Posts: 696
- Joined: Sat Aug 30, 2008 1:42 pm
- Location: Was Up North, now Daan Sarf in Dorset [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: L reg 827 Sterling
Dave,
Both my machines are powered by the 2.7 V6 Honda lump. 2litres aren't my bag.
Nick
Both my machines are powered by the 2.7 V6 Honda lump. 2litres aren't my bag.
Nick
- scoobyh123
- Rover Guru
- Posts: 12156
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: L reg 827 Sterling
Sorry Nick, must be mixing you up with someone else!
Who is online
Users browsing this forum: No registered users and 2 guests