Bonkers 1654
-
- Regular Visitor
- Posts: 388
- Joined: Mon Sep 01, 2008 5:08 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Bonkers 1654
1989 Rover Sterling in Atlantic blue 35k miles. - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
- CHR15E
- Site Admin
- Posts: 13235
- Joined: Sat Aug 30, 2008 3:32 pm
- Location: Notts. J28 M1 [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
Good stuff.
Work out a way of putting a tow bar on it and once it's legal you can chuck my trailer on the back? That would be a sight?
Work out a way of putting a tow bar on it and once it's legal you can chuck my trailer on the back? That would be a sight?
Chris
19 Vauxhall Astra 1.6T SRi Nav Estate
08 Vauxhall Astra 2.0T Design Twintop
02 Jeep Grand Cherokee Overland 4.7 V8 HO
Previously owned 57 800s 2000-2012
Relapse of 1 in 2021 Now Sold
19 Vauxhall Astra 1.6T SRi Nav Estate
08 Vauxhall Astra 2.0T Design Twintop
02 Jeep Grand Cherokee Overland 4.7 V8 HO
Previously owned 57 800s 2000-2012
Relapse of 1 in 2021 Now Sold
- Nuts4my827
- Rover Guru
- Posts: 2186
- Joined: Wed Sep 10, 2008 1:43 pm
- Location: Croydon [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
The workmanship is amazing. The art project was funded by the Japanese Government
I love the join between the rear/center doors
I love the join between the rear/center doors
Phil B
95 827 Stirling: Nightfire Saloon.
96 Coupé 827 Manual White Gold.
97 Coupé 820 Vitesse Gunmetal.
99 820 Vitesse Nightfire Fastback. SERIOUS amount of welding done. Lived in a fettid garage for years.
EX 1994 Saloon Rover 827 SLi White Gold- RIP.
95 827 Stirling: Nightfire Saloon.
96 Coupé 827 Manual White Gold.
97 Coupé 820 Vitesse Gunmetal.
99 820 Vitesse Nightfire Fastback. SERIOUS amount of welding done. Lived in a fettid garage for years.
EX 1994 Saloon Rover 827 SLi White Gold- RIP.
-
- Rover Guru
- Posts: 830
- Joined: Sat Aug 30, 2008 7:16 am
- Location: East Yorks [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
Absolutely barking mad, you won't know whether you're coming or going
Mk2 Vitesse Fastback
- SJG
- Site Admin
- Posts: 3413
- Joined: Mon Sep 01, 2008 9:39 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
Very good!Slamm wrote:Absolutely barking mad, you won't know whether you're coming or going
Simon
Rover Vitesse Coupe - 1997
Rover Vitesse Coupe - 1997
- scoobyh123
- Rover Guru
- Posts: 12154
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Bonkers 1654
Another vehicular Anglo-Japanese collaboration! Kind of fitting in a way Yasu chose to do it to an 800.
As long as it's nowhere near Dagenham - that's one stop short of Barking!
As long as it's nowhere near Dagenham - that's one stop short of Barking!
- Manalishi
- Rover Guru
- Posts: 2458
- Joined: Wed Jun 03, 2009 2:38 pm
- Location: Stockholm/Sweden [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
Crazy.
Henrik
Rover 820 Vitesse Coupe 180bhp -93 (Italy)
Rover 827 Vitesse manual (non cat) -89 (Spain)
Lexus GS450h -13
Austin Seven Special -36
Gone:
Rover 820 ti -95
Rover 216 DOHC coupe -93
Rover 620 ti -98
Rover 820 Vitesse Coupe 180bhp -93 (Italy)
Rover 827 Vitesse manual (non cat) -89 (Spain)
Lexus GS450h -13
Austin Seven Special -36
Gone:
Rover 820 ti -95
Rover 216 DOHC coupe -93
Rover 620 ti -98
-
- Regular Visitor
- Posts: 388
- Joined: Mon Sep 01, 2008 5:08 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
CHR15E wrote:Good stuff.
Work out a way of putting a tow bar on it and once it's legal you can chuck my trailer on the back? That would be a sight?
Might take you up on that, would certainly be even more mind blowing to look at!!
Yeah it's pretty amazing, kept getting compliments on it when we had friends over for a BBQ yesterday, not to mention the "is that a limo, err wait there's a front end on that end of the car" "my head can't cope"Nuts4my827 wrote:The workmanship is amazing. The art project was funded by the Japanese Government
I love the join between the rear/center doors
Haha yeahscoobyh123 wrote:Another vehicular Anglo-Japanese collaboration! Kind of fitting in a way Yasu chose to do it to an 800.
As long as it's nowhere near Dagenham - that's one stop short of Barking!
Sorted the running of the front engine.... I mean the Vitesse frond end Runs nicely just trying to sort the Sli engine, got a spark (swapped igniter, coil, rotor arm and dizzy cap off my sterling) it turns over but doesn't fire, fuel is getting through as i undid the fuel filter 12 mm bolt and petrol fountains out..
Turned it around in my driveway, my brother at one end me at the other, certainly a surreal experience.
1989 Rover Sterling in Atlantic blue 35k miles. - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
- traineefarmer
- Rover Guru
- Posts: 1276
- Joined: Wed Dec 18, 2013 9:31 pm
- Location: The executive parking bay. [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
-
- Regular Visitor
- Posts: 388
- Joined: Mon Sep 01, 2008 5:08 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
Progress has been slow on this, no off the shelf bolt on parts without modification and very little to no info out there on on caliper dimensions etc, i decided to bite the bullet and buy a pair of MGF rear calipers, if all else fails i can use them on my Sterling.
Used a piece of 6mm scrap plastic from work and glued it to the old caliper mounting holes then glued the handbrake carrier in the position i needed, i then had the template for the 6mm steel plate. Got some plate and the end result was only about 2mm out, nothing a little adjustment couldn't fix.
So a first for a Rover 800, i give you hand brake calipers on the front!!!
Pads line up pretty spot on.
Bracket
Does this look normal for the front end
Side view
I have a pair of Rover 600 handbrake cables, these are a great fit, just waiting on the cable guide , then i can mount that to the underside and use the 3mm stainless wire to go from there to the handbrake.
I just need to make a template for the underside of the subframe to cut some 8mm ally plate to hold one end of the track rod end in place of the old steering rack mounts.
Used a piece of 6mm scrap plastic from work and glued it to the old caliper mounting holes then glued the handbrake carrier in the position i needed, i then had the template for the 6mm steel plate. Got some plate and the end result was only about 2mm out, nothing a little adjustment couldn't fix.
So a first for a Rover 800, i give you hand brake calipers on the front!!!
Pads line up pretty spot on.
Bracket
Does this look normal for the front end
Side view
I have a pair of Rover 600 handbrake cables, these are a great fit, just waiting on the cable guide , then i can mount that to the underside and use the 3mm stainless wire to go from there to the handbrake.
I just need to make a template for the underside of the subframe to cut some 8mm ally plate to hold one end of the track rod end in place of the old steering rack mounts.
1989 Rover Sterling in Atlantic blue 35k miles. - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
- scoobyh123
- Rover Guru
- Posts: 12154
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Bonkers 1654
All good work Andy - looking forward to the updates!
-
- Regular Visitor
- Posts: 388
- Joined: Mon Sep 01, 2008 5:08 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
Took the "renamed" 1654 to 8272 for it's IVA test today..
The amount of looks and people filming me on their phones on the motorway on the way back was crazy :p
The main thing it failed on was the rear brakes, it passed the handbrake at 20% (190kgf ish) but with no reserve travel but the rear hydraulic side of things failed at 11%,
The pedal was a little spongy, i had fitted new seals and pistons to the front calipers last night (snow delayed them getting here) and it was getting late and wanted to give myself an extra hour in case of issues on the way to the test centre so had little time to check it over.
My brother followed me in my work van with tools etc and has a lot of footage from my dash cam
As i've never been able to test the brakes on the road today it's not easy getting it right
The amount of looks and people filming me on their phones on the motorway on the way back was crazy :p
The main thing it failed on was the rear brakes, it passed the handbrake at 20% (190kgf ish) but with no reserve travel but the rear hydraulic side of things failed at 11%,
The pedal was a little spongy, i had fitted new seals and pistons to the front calipers last night (snow delayed them getting here) and it was getting late and wanted to give myself an extra hour in case of issues on the way to the test centre so had little time to check it over.
My brother followed me in my work van with tools etc and has a lot of footage from my dash cam
As i've never been able to test the brakes on the road today it's not easy getting it right
Last edited by austinpowers on Sun Dec 17, 2017 12:27 pm, edited 1 time in total.
1989 Rover Sterling in Atlantic blue 35k miles. - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
- scoobyh123
- Rover Guru
- Posts: 12154
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Bonkers 1654
I'd love to see the testers face as he goes to get in the "wrong" drivers door!
Bit of a bugger on the brakes, when you bled the front ones last night did you lift the caliper up so the bleed nipple was as high as possible?
Bit of a bugger on the brakes, when you bled the front ones last night did you lift the caliper up so the bleed nipple was as high as possible?
-
- Regular Visitor
- Posts: 388
- Joined: Mon Sep 01, 2008 5:08 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
I bled it in situe, all bolted up. Would that make a difference as the nipple is higher than the rest of the caliper when bolted up.scoobyh123 wrote: ↑Fri Dec 15, 2017 9:39 pmI'd love to see the testers face as he goes to get in the "wrong" drivers door!
Bit of a bugger on the brakes, when you bled the front ones last night did you lift the caliper up so the bleed nipple was as high as possible?
1989 Rover Sterling in Atlantic blue 35k miles. - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
2017 "special" edition in white
1990 Rover Vitesse manual - Sold
1990 Rover Sterling - Sold
- Alucard7002
- Now with more then 1000 posts!
- Posts: 1265
- Joined: Mon May 18, 2009 8:09 pm
- Location: Cambridgeshire [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Bonkers 1654
Check brake proportioning valve on the bulkhead in the "front that you have designated the front" (this will get confusing fast!)
My first thought would be to replace it with something like this :
https://www.ebay.co.uk/i/112057284065?c ... 912&crdt=0
My first thought would be to replace it with something like this :
https://www.ebay.co.uk/i/112057284065?c ... 912&crdt=0
Dušan - head lunatic @ Four Paw Racing
'66 Ford Country Sedan
'89 Mazda MX5 1.6
'98 Mitsubishi Evo 4 GSR
'07 Subaru Legacy Spec B
'66 Ford Country Sedan
'89 Mazda MX5 1.6
'98 Mitsubishi Evo 4 GSR
'07 Subaru Legacy Spec B
Who is online
Users browsing this forum: No registered users and 37 guests