Pre-production coupe
- rovercoup
- Rover Guru
- Posts: 2248
- Joined: Fri Dec 14, 2012 9:34 pm
- Location: Herefordshire [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Pre-production coupe
So, did anyone on here buy the Storm Grey J plated Pre-production coupe that was on ebay and sold for £700?
I did go and have a look at this car as I was very interested for historical purposes and for a light restoration (mainly paint) to bring back to original but on inspection it would require a bit more than I was prepared to undertake with the current fleet.
Whoever got I hope they either go for a restoration rather than a rag around car due to the body matched parts and horrid spoiler.
I did go and have a look at this car as I was very interested for historical purposes and for a light restoration (mainly paint) to bring back to original but on inspection it would require a bit more than I was prepared to undertake with the current fleet.
Whoever got I hope they either go for a restoration rather than a rag around car due to the body matched parts and horrid spoiler.
Rover 827 Vitesse Fastback Man Mk1 89
Rover 827 Sterling saloon Auto 90
Rover 820 Fastback 2.0 MPi Auto 90
Rover 820 Coupe sport 94
Rover 827 Sterling Saloon 95 auto
Rover 820 Vitesse Fastback 98
Rover 25 2.0TD 01
MGTF 135 02
Rover 45 1.6 SE 05
Rover 827 Sterling saloon Auto 90
Rover 820 Fastback 2.0 MPi Auto 90
Rover 820 Coupe sport 94
Rover 827 Sterling Saloon 95 auto
Rover 820 Vitesse Fastback 98
Rover 25 2.0TD 01
MGTF 135 02
Rover 45 1.6 SE 05
- SJG
- Site Admin
- Posts: 3413
- Joined: Mon Sep 01, 2008 9:39 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Pre-production coupe
I hadn't seen it Steve, was there a link to it?
Simon
Rover Vitesse Coupe - 1997
Rover Vitesse Coupe - 1997
- rovercoup
- Rover Guru
- Posts: 2248
- Joined: Fri Dec 14, 2012 9:34 pm
- Location: Herefordshire [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Pre-production coupe
This is the one Simon, I was hoping to have got it but then someone let the cat out of the bag regarding pre-production. Probably done me a favour as I reckon you would need to spend a £1000 min to get anywhere near right as both sills will need replacing, cambelt not done for 13 years, all four arches corroded plus cost of putting paintwork right and removal of the rear spoiler.
http://www.ebay.co.uk/itm/1992-ROVER-82 ... true&rt=nc
http://www.ebay.co.uk/itm/1992-ROVER-82 ... true&rt=nc
Rover 827 Vitesse Fastback Man Mk1 89
Rover 827 Sterling saloon Auto 90
Rover 820 Fastback 2.0 MPi Auto 90
Rover 820 Coupe sport 94
Rover 827 Sterling Saloon 95 auto
Rover 820 Vitesse Fastback 98
Rover 25 2.0TD 01
MGTF 135 02
Rover 45 1.6 SE 05
Rover 827 Sterling saloon Auto 90
Rover 820 Fastback 2.0 MPi Auto 90
Rover 820 Coupe sport 94
Rover 827 Sterling Saloon 95 auto
Rover 820 Vitesse Fastback 98
Rover 25 2.0TD 01
MGTF 135 02
Rover 45 1.6 SE 05
- SJG
- Site Admin
- Posts: 3413
- Joined: Mon Sep 01, 2008 9:39 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Pre-production coupe
Oh I had seen it, sorry. I would have liked a pre production coupe, I went to look at one about 18 months ago but it did not work out. There is a bit of a story to it but I will save it for another time.
Simon
Rover Vitesse Coupe - 1997
Rover Vitesse Coupe - 1997
- scoobyh123
- Rover Guru
- Posts: 12149
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Pre-production coupe
rovercoup wrote:This is the one Simon, I was hoping to have got it but then someone let the cat out of the bag regarding pre-production. Probably done me a favour as I reckon you would need to spend a £1000 min to get anywhere near right as both sills will need replacing, cambelt not done for 13 years, all four arches corroded plus cost of putting paintwork right and removal of the rear spoiler.
http://www.ebay.co.uk/itm/1992-ROVER-82 ... true&rt=nc
Funny thing is Steve the price dropped by £100 shortly after the bit about it being a pre-production coupe appeared on the listing. I'd be interested in finding out if it left the fatory with the fastback boot spoiler, the MkIIb alarm LED and door cards, SRS steering wheel etc - if so then by rights to do an "as original" resto, all the bits we view as modifications would have to stay if it left the factory like it.
Who can say if the person destined to have it originally didn't specify all those things?
Looking closely at the door glass, there is the SRS logo and i can't be sure but i don't think airbags were even an option in 1992? Think you'd need to see the original build sheet to know if it had all those bits before it left the factory.
- SJG
- Site Admin
- Posts: 3413
- Joined: Mon Sep 01, 2008 9:39 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Pre-production coupe
Pretty sure all the coupés had a drivers air bag from the start Dave. The pre production model I looked at did
Simon
Rover Vitesse Coupe - 1997
Rover Vitesse Coupe - 1997
- scoobyh123
- Rover Guru
- Posts: 12149
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Pre-production coupe
That's interesting Simon, thanks. Makes sense in a lot of ways as the coupe was designed primarily for the USA market and i think airbags are mandatory, or at least were back in 1992. That said i'm surprised they weren't deleted for here until they became part of the rest of the range purely on cost.
- scoobyh123
- Rover Guru
- Posts: 12149
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Pre-production coupe
How do you do that? By that i mean "é" - don't know how to access it on the PC.Simon Hubbard wrote: coupés
- SJG
- Site Admin
- Posts: 3413
- Joined: Mon Sep 01, 2008 9:39 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Pre-production coupe
I just use my phone when I type things out on the forum, one of the few good things about predictive textscoobyh123 wrote:How do you do that? By that i mean "é" - don't know how to access it on the PC.Simon Hubbard wrote: coupés
Simon
Rover Vitesse Coupe - 1997
Rover Vitesse Coupe - 1997
- scoubix16
- Regular Visitor
- Posts: 63
- Joined: Fri Mar 20, 2015 7:09 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Pre-production coupe
the airbag was initially an option, and remained so until MY94 when it became standard, on the French market at least.
'93 Rover 827 Coupé - LHD
'99 Rover 75 2.5 V6 Connoisseur - Dealer Launch - LHD
'04 MG ZT-T 260 SE (V8) - Ex-Longbridge 75 V8 Tourer development car - LHD
'99 Rover 75 2.5 V6 Connoisseur - Dealer Launch - LHD
'04 MG ZT-T 260 SE (V8) - Ex-Longbridge 75 V8 Tourer development car - LHD
- BlueRover
- Rover Guru
- Posts: 1851
- Joined: Mon Sep 01, 2008 7:39 pm
- Location: Bolton, Lancashire
- Contact:
Re: Pre-production coupe
é = press and hold the ALT key on the left side of the keyboard and type the number 130 on the number keypad, release the ALT key and the letter magically appears.
In the early days of computers there were only 255 characters available, the first 31 being reserved for page coding in text documents. ALT 032 creates a space, an ALT 100 = d, ALT 200 = ╚.
Nowadays there are hundreds more characters available many of which are 4 digit numbers, ALT 0410 = š
In the early days of computers there were only 255 characters available, the first 31 being reserved for page coding in text documents. ALT 032 creates a space, an ALT 100 = d, ALT 200 = ╚.
Nowadays there are hundreds more characters available many of which are 4 digit numbers, ALT 0410 = š
Gordon:-
Only two 800's now,white 1991 820i with TWR and full special order leather (been stood for 15 years) and now a Nightfire red Tickford with 135k on the clock
Only two 800's now,white 1991 820i with TWR and full special order leather (been stood for 15 years) and now a Nightfire red Tickford with 135k on the clock
- scoobyh123
- Rover Guru
- Posts: 12149
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Pre-production coupe
Thanks Simon and Gordon - i don't have a separate number keypad on my laptop but i know i can get the "posh" e on the end of coupe on my phone too - i just type "coupe" and it predicts "coupé" but typing <ALT130> as described doesn't work on my laptop so i'll try it on the full size PC tomorrow.
- scoobyh123
- Rover Guru
- Posts: 12149
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Pre-production coupe
Tomorrow came and went and i totally forgot about trying ALT<130> to get the é and as i remembered today, i'm happy to say it works on my PC as it has the separate number pad so thanks again!
-
- Rover Guru
- Posts: 1287
- Joined: Sun Jun 09, 2013 11:19 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Pre-production coupe
Are we French all of a sudden, why do you want the é
Rover never put é on the Coupe
and that's good enough for me
Rover never put é on the Coupe
and that's good enough for me
1993 Rover 827 SLI Fastback Mk2
1999 Rover 825 Sterling Saloon Mk2 (HGF)
------------------
Previously
1996 Rover 825 Sterling Coupe Mk2
1993 Rover 827 Sterling Saloon Mk2
1990 Rover 827 Sterling Saloon Mk1
1972 Rover P6 2000TC
1999 Rover 825 Sterling Saloon Mk2 (HGF)
------------------
Previously
1996 Rover 825 Sterling Coupe Mk2
1993 Rover 827 Sterling Saloon Mk2
1990 Rover 827 Sterling Saloon Mk1
1972 Rover P6 2000TC
- scoobyh123
- Rover Guru
- Posts: 12149
- Joined: Sat Jul 11, 2009 10:27 pm
- Location: Next door to Top Gun, Suffolk
- Contact:
Re: Pre-production coupe
Technically they should have done as it means "has been cut off" but being a French word that has been adopted the it is "coupé".
Who is online
Users browsing this forum: No registered users and 24 guests